Required Hardware

If you purchased Aerotenna's airframe, you should have all the parts you need to be able to fly.
If you are building your own airframe, make sure you have all the necessary hardware! You will need:
• frame body
• motors with ESCs
• PPM RC receiver and transmitter
• GPS antenna
• Micro SD card
• BEC to output 5V for powering OcPoC
• battery (matching ESC and motor requirements)
• (optional) telemetry modules for GCS link

In this example, we hooked up the OcPoC to a DJI Flame Wheel airframe. Other airframes follow similar steps.