Install Required Hardware
You only need two things to integrate μLanding with your system:
- μLanding C1
- 5V DC power supply
Attach μLanding to Airframe
Step 1: Secure the base lock on the airframe or any other suitable position, ensuring that the fastener points down vertically (when airframe is standing upright).
Step 2: Attach and secure μLanding under the base lock.
Powering μLanding
Step 1: Connect 5V DC power supply to the RED port.
Step 2: Connect GND to the BLACK port.
(connections shown below)
Connection between μLanding and Receiver Device
Connect your own receiver device with corresponding interface and protocol.
Once everything is hooked up and assembled, move on to Data Receiving.
Updated over 6 years ago
What’s Next